MPS SGP系列高端耳機線,是台灣MPS在2018年11月推出的針對高端耳機 系列產品。目前型號為SGP-401單芯,404為四芯,408為八芯。
耳機線採用 19條0.08mm的 99.9999%高端日本進口單晶銅(OCC)材料于台灣台北工廠 製作,外皮採用PE+特殊屏蔽材料混合編織而成,製作成0.62mm外徑的超細 耳機線。
聲音乾淨,解析度高、高頻明亮清晰,中頻柔和,低頻扎實有力有彈 性。適合于各類高端耳機,可製作各類耳機線,聲音效果比耳機原線大幅提升。
MPS SGP series high-end earphones cable is new one of The MPS in November 2018 . The model is SGP-401 single core, 404 for four cores, and 408 for eight cores. Cable is use19PCS-0.08mm of 99.9999% high-end Japanese OCC materials Made in Taiwan MPS Taipei factory. The outer skin is made of PE+ special shielding material, and is made into ultra-fine 0.62mm outer diameter. Earphone line. The sound is clean, the resolution is high, the high frequency is bright and clear, the middle frequency is soft, the low frequency is strong, powerful. It is suitable for all kinds of high-end headphones, and can produce all kinds of earphone wires. The sound effect is greatly improved than that of headphones.
MPS SGP單晶銅耳機線,由於單晶銅的特性,易斷,有方向性,製作時務必注意細心。 單晶銅線芯是有方向性,箭頭指向→就是音源的傳輸方向,箭頭→指向耳機單元方向。 單芯耳機線需要自行編織,編織4芯、8芯等芯數,編織完成后,焊接插頭端與接耳機 單元端的線材必需要用萬用表測量分辨,以免造成短接損壞耳機機器。焊接完成后也 請再測試一遍,方可以通電使用。耳塞耳機接線因為類型眾多,我們不逐一介紹,插 頭也是千百種,當然我們更推薦MPS專用耳機插頭。焊錫建議採用無鉛焊錫,如需要更高解析度建議採用更高含銀量焊錫。單晶銅線易斷,剪線請務必小心。線芯無包漆,剝開直接焊接即可。
MPS SGP OCC earphone cable, due to the characteristics of OCC , easy to break, directional, production must pay attention to careful. The OCC wire core is directional, with the arrow pointing the transmission direction of the sound source, and the arrow the direction of the headphone unit. The wire must be measured by multimeter, so as not to cause short circuit damage to the earphone machine. After welding is completed. There are thousands of headphones. Of course, we recommend the MPS earphone plug. Soldering tin is recommended for lead-free solder. If higher resolution is needed, soldering tin with higher silver content is recommended. OCC cable is easy to break, and cut line must be careful. The core is uncoated and stripped and welded directly.
![SGP-404 SGP-404]()
![SGP-404 SGP-404]()
![SGP-404 SGP-404]()